English (International) 
Português 
简体中文 
H25 Series (US) / G25 Series (Metric)
| Maximum Flow Rate: | 20.0 gpm / 75.9 lpm |
| Maximum Pressure: | 1000 psig / 69 barg for Metallic Pump Heads |
| 350 psig / 24 barg for Non-metallic Pump Heads |
Key Features
- The highest levels of volumetric and energy efficiencies across a full rpm range.
- API 674*
- ATEX available
- No mechanical dynamic seals, packing, or cups to leak, wear or replace – reduces maintenance, costs and downtime.
- Can run dry indefinitely; operates against a closed inlet without damage to the pump.
- Pumped liquid is 100% contained, eliminating emissions.
- Reliably handles a wide range of liquid viscosities, corrosives, abrasives, slurries and suspended solids that can destroy other pumps.
- Reduced ownership costs in acquisition, operation, service, maintenance, and energy use.
* Hydra-Cell Pro® pumps conform with API standards for accuracy, linearity and repeatability with certain exceptions. Contact Wanner for more information.
Pump configuration available for 24-hour shipping
LEARN MORE
Resources
Specifications
H25 Series (Imperial NPT) / G25 Series (Metric BSPT)
H25 - Flow Capacities @1000 Psi (69 Bar)
| Model | Flow Capacities | max rpm | gpm | lpm |
|---|---|---|---|---|
| H25-X / G25-X | @1000 psig / 69 barg | 1050 | 20.0 | 75.7 |
| H25-E / G25-E | @1000 psig / 69 barg | 1150 | 20.0 | 75.9 |
H25 - Other Specifications
| Maximum Discharge Pressure | |
| Metallic Heads: | 1000 psig / 69 barg (H25-X & G25-X / H25-E & G25-E) |
| Non-metallic Heads: | 250 psig / 17 barg Polypropylene (H25-X & G25-X / H25-E & G25-E) |
| 350 psig / 24 barg PVDF (H25-X & G25-X / H25-E & G25-E) | |
| Maximum Inlet Pressure | 250 psig / 17 barg (H25-X & G25-X / H25-E & G25-E) |
| Maximum Operating Temperature | |
| Metallic Heads: | 250˚F / 121˚C - Consult Wanner for correct component selection for temperatures from 160 ̊F / 71 ̊C to 250 ̊F / 121 ̊C. |
| Non-metallic Heads: | 140˚F / 60˚C |
| Maximum Solids Size | 800 microns |
More information available on the datasheet.
Materials
Liquid Head Materials
- Brass
- Cast Iron (Nickel-plated)
- Polypropylene with Hastelloy C Followers
- Polypropylene with 316L Stainless Steel Followers
- PVDF with Hastelloy C Followers
- Duplex Alloy 2205
- Super Duplex Alloy 2207
- 316L Stainless Steel
- 316L Stainless Steel - ANSI RF Flanges 150 x 600 lb
- 316L Stainless Steel - Tri-clamp Flanges
- Hastelloy CW12MW
Diaphragm Materials
- Aflas
- Buna-N-XS
- EPDM
- FKM
- FFKM PTFE O-Ring
- Neoprene
- PTFE
Valve Materials
- Ceramic
- Hastelloy C
- Nitronic 50
- Tungsten Carbide
- 17-4 Stainless Steel
Note: Materials selection may be configuration dependent and some materials may not be available in all regions / markets. Download applicable product datasheet for complete materials and component selection information.
Accessories
Baseplate Assemblies
Note: baseplate dimensions are for representation only and may change based on region, configuration or motor selection. Contact Wanner for additional information on available baseplate assemblies and customization.
