English (International) 
Português 
简体中文 
D10 Series (US) / G10 Series (Metric)
| Flow Rate: | 8.8 gpm / 33.4 lpm |
| Max. Pressure: | 1500 psig / 103 barg for Metallic Pump Heads |
| 350 psig / 24 barg for Non-metallic Pump Heads |
Key Features
- The highest levels of volumetric and energy efficiencies across a full rpm range.
- API 674 pumps*
- ATEX available
- No mechanical dynamic seals, packing, or cups to leak, wear or replace – reduces maintenance, costs and downtime.
- Can run dry indefinitely; operates against a closed inlet without damage to the pump.
- Pumped liquid is 100% contained, eliminating emissions.
- Reliably handles a wide range of liquid viscosities, corrosives, abrasives, slurries and suspended solids that can destroy other pumps.
- Reduced ownership costs in acquisition, operation, service, maintenance, and energy use.
* Hydra-Cell Pro® pumps conform with API standards for accuracy, linearity and repeatability with certain exceptions. Contact Wanner for more information.
Resources
Specifications
D10 Series (Imperial NPT) / G10 Series (Metric BSPT)
| Model | Flow Capacities | max rpm | gpm | lpm |
|---|---|---|---|---|
| D10-X / G10-X | @1000 psig / 69 barg | 1450 | 8.10 | 30.6 |
| D10-E / G10-E | @1000 psig / 69 barg | 1750 | 8.83 | 33.4 |
| Maximum Discharge Pressure | |
| Metallic Heads: | 1000 psig / 69 barg @1450 rpm (D10-X / G10-X) |
| 1000 psig / 69 barg @1750 rpm (D10-E / G10-E) | |
| 1500 psig / 103 barg @790 rpm (D10-X / G10-X) | |
| Non-metallic Heads: | 250 psig / 17 barg Polypropylene |
| 350 psig / 24 barg PVDF | |
| Maximum Inlet Pressure | 250 psig / 17 barg |
| Maximum Operating Temperature | |
| Metallic Heads: | 250 ̊F / 121 ̊C - Consult Wanner for correct component selection for temperatures from 160 ̊F / 71 ̊C to 250 ̊F / 121 ̊C. |
| Non-metallic Heads: | 140 ̊F / 60 ̊C |
| Maximum Solids Size | 500 microns |
More information available on the datasheet.
Materials
Liquid Head Materials
- Brass
- Cast Iron (Nickel-plated)
- Duplex Alloy 2205 Stainless Steel
- PVDF
- Polypropylene
- 316L Stainless Steel with ANSI RF Flanges
- 316L Stainless Steel
- 316L Stainless Steel with Tri-clamp Flanges Hastelloy CW12MW
Diaphragm Materials
- Aflas
- Buna-N
- EPDM
- FKM
- FFKM / PTFE O-Ring
- Neoprene
- PTFE
Valve Materials
- Ceramic
- Hastelloy C
- Nitronic 50
- Tungsten Carbide
- 17-4 Stainless Steel
Note: Materials selection may be configuration dependent and some materials may not be available in all regions / markets. Download applicable product datasheet for complete materials and component selection information.
Datasheets
| Datasheets | |
|---|---|
| D10 (US/Imperial) Datasheet (Performance, Dimensions, Options, Ordering Information) |  |
| G10 (International/Metric) Datasheet and ATEX Certification (Performance, Dimensions, Options, Ordering Information) | |
| Application Worksheet | |
| Installation Guidelines | |
Manuals
Accessories
Baseplate Assemblies
Note: baseplate dimensions are for representation only and may change based on region, configuration or motor selection. Contact Wanner for additional information on available baseplate assemblies and customization.
3D CAD Files
| Files | |
|---|---|
| D-10 w/Metallic Pump Head | (Solidworks Part) |
| D10/G10 w/Non- Metallic Pump Head | (Solidworks Part) |
