PH30 Series - Wanner Pumps

PH30 Series Seal-less Pump



Max. Flow Rate:	33.4 l/min (8.8 US gpm)
Max. Pressure:	40 bar (580 psi) for Metallic Pump Heads

Low pulse flow; no pulsation dampeners needed in most applications
Unique multiple diaphragm arrangement results in compact design, saving on installation space
Extremely accurate wide adjustable flow range for ultimate controllability
Low shear pumping action
Reliably handles challenging liquids and slurries including abrasives, corrosives, non-lubricating, and liquids with micron-sized particles
ASME BPE flange connections as standard
Wetted surfaces polished to ≤ 0.8 Ra
Diaphragm options to FDA compliance
ATEX certification
TSE / BSE-free materials
Multipurpose: CIP and main process pump
Full material traceability

Model	Flow Capacities	rpm	I/min	US gpm
PH30AX	@40 bar (580 psi) 4-pole motor @50 Hz	1450	30.6	8.1
PH30AE	@40 bar (580 psi) 4-pole motor @50 Hz	1450	27.7	7.4
PH30AX	@40 bar (580 psi) 6-pole motor @50 Hz	960	20.2	5.4
PH30AE	@40 bar (580 psi) 6-pole motor @50 Hz	960	18.3	4.9

Model	Delivery	litres/rev	US gal/rev
PH30AX	@40 bar (580 psi)	0.0205	0.0054
PH30AE	@40 bar (580 psi)	0.0186	0.0049

Diaphragms per Liquid End	3
Maximum Discharge Pressure
Metallic Heads:	40 bar	580 psi
Maximum Inlet Pressure	17 bar	250 psi
Maximum Operating Temperature
Metallic Heads:	90°C	194°F
Consult Wanner for correct component selection for temperatures greater than 71°C (160°F)
Maximum Solids Size	500 microns

Flow Control	Electronic Variable Speed Drive
Weight (less motor)
Metallic Heads:	30.0kg	66 lbs.
Controllers
Mechanical Adjustment	245 mm D x 200 mm	8.66 in. D x 6.10 in.

Flow Capacities	@ 40 bar (580 psi)	Min. Flow			Max. Flow
Model	Max. Pump Input rpm	I/hr	gph	I/hr	gph
PH30C...NA300	1200	120	32	1470	388

Flow Capacities	@ 20 bar (290 psi)	Min. Flow			Max. Flow
Model	Max. Pump Input rpm	l/hr	gph	l/hr	gph
PH30C...NA100	600	60	16	732	193
PH30C...NA200	1200	120	32	1470	388

Maximum Discharge Pressure Metallic Heads
PH30C...NA100	Up to 20 bar (290 psi) @ 600 rpm max
PH30C...NA200	Up to 20 bar (290 psi) @ 1200 rpm max
PH30C...NA300	Up to 40 bar (580 psi) @ 1200 rpm max

Datasheets
PH30 (International/Metric) Datasheet and ATEX Certification (Performance, Dimensions, Options, Ordering Information)