PH10 Series - Wanner Pumps

PH10 Series Seal-less Pump



Max. Flow Rate:	11.7 l/min (3.1 US gpm)
Max. Pressure:	40 bar (580 psi) for Metallic Pump Heads

Low pulse flow; no pulsation dampeners needed in most applications
Unique multiple diaphragm arrangement results in compact design, saving on installation space
Extremely accurate wide adjustable flow range for ultimate controllability
Low shear pumping action
Reliably handles challenging liquids and slurries including abrasives, corrosives, non-lubricating, and liquids with micron-sized particles
ASME BPE flange connections as standard
Wetted surfaces polished to ≤ 0.8 Ra
Diaphragm options to FDA compliance
ATEX certification
TSE / BSE-free materials
Multipurpose: CIP and main process pump
Full material traceability

Model	Flow Capacities	rpm	I/min	US gpm
PH10AX	@40 bar (580 psi) 4-pole motor @50 Hz	1450	9.7	2.6
PH10AE	@40 bar (580 psi) 4-pole motor @50 Hz	1450	6.8	1.8
PH10AX	@40 bar (580 psi) 6-pole motor @50 Hz	960	6.2	1.6
PH10AE	@40 bar (580 psi) 6-pole motor @50 Hz	960	4.5	1.1

Model	Delivery @40 bar (580 psi)	litres/rev	US gal/rev
PH10AX	@40 bar (580 psi) 4-pole motor @50 Hz	1450	9.7
PH10AE	@40 bar (580 psi) 4-pole motor @50 Hz	1450	6.8
PH10AX	@40 bar (580 psi) 6-pole motor @50 Hz	960	6.2
PH10AE	@40 bar (580 psi) 6-pole motor @50 Hz	960	4.5


Diaphragms per Liquid End	3
Maximum Discharge Pressure
Metallic Heads:	40 bar	580 psi
Maximum Inlet Pressure	17 bar	250 psi
Maximum Operating Temperature
Metallic Heads:	90°C	194°F
Consult Wanner for correct component selection for temperatures greater than 71°C (160°F)
Maximum Solids Size	200 microns


Flow Control	Electronic Variable Speed Drive
Weight (less motor)
Metallic Heads:	20.0kg	44 lbs.
Controllers
Mechanical Adjustment	220 mm D x 155 mm	8.66 in. D x 6.10 in.
	(7.2kg)	(15.9kg)
Electronic Controller	215 mm W x 280 mm D	8.47 in. W x 11 in. D
	x 300 mm H (10 kg)	x 11.8 in. H (22 lbs.)

Flow Capacities	@ 40 bar (580 psi)	Min. Flow		Min. Flow
Model	Max. Pump Input rpm	I/hr	gph	l/hr	gph
PH10C...NA300	1200	38	10	462	122

Flow Capacities	@ 20 bar (290 psi)	Min. Flow		Min. Flow
Model	Max. Pump Input rpm	l/hr	gph	l/hr	gph
PH10C...NA100	600	19	5	230	61
PH10C...NA200	1200	38	10	462	122

Datasheets
PH10 (International/Metric) Datasheet and ATEX Certification (Performance, Dimensions, Options, Ordering Information)