Home > Applications by Liquid Overview > Shear-Sensitive Liquids

SHEAR-SENSITIVE LIQUIDS

Hydra-Cell Pro delivers a low shear pumping action, even at high pressure.

Ask for Assistance

Need help to reliably pump your process liquid?

Shear-Sensitive Liquids

Hydra-Cell Pro delivers a low shear pumping action, even at high pressure.

Extensive customer testing on shear sensitive liquids, such as polymers, algae solutions, food oils and milk from 50 to 3,500 cP, have proved that the Hydra-Cell's pumping action achieves the lowest shear, especially in high pressure applications, testing up to 200 bar.

Shear is imparted to a liquid when the velocity gradient through the liquid is large. This can be high when there is a moving surface travelling over a stationary surface. If shear is high enough it can break down the structure of the liquid changing it’s properties. For example in algae suspensions used in bio fuel production.

The gentle pumping action of the Hydra-Cell pump helps to reduce shear and improve processing.

Wanner Application Briefs

shear sensitive liquids

Polymer Injection for Enhanced Oil Recovery

Hydra-Cell® seal-less pumps with their low shear pumping action are being used for Enhanced Oil Recovery through Chemical EOR methods using Alkali-Surfactant-Polymer (ASP) injection for a major oil & gas company in India.

Alkaline Surfactant Polymer is injected in the reservoir @ 1120 m 3/day, through 14 injector wells (i.e. @ 80 m 3/day per well). The ASP Slug is prepared by mixing 2.5 wt % Soda Ash, 0.25 % Surfactant and 1500 ppm Polymer in water, and is stirred in inline mixer for homogeneous mixing/maturing before injection.

We can help

Wanner’s technical engineers can assist you in selecting a Hydra-Cell Pro seal-less pump to reliably handle your most challenging process liquids.

  • Low NPSH due to High vapor pressure?
  • Need assistance or support with NPSH in terms of system design?
  • Are you replacing other pump technologies for abrasive/slurry duty application?
  • Our technical engineers can assist with selecting a Hydra-Cell seal-less pump to reliably handle your process liquid.

Hydra-Cell® Seal-less Pumps Reliably Handle Shear Sensitive Liquids

  • Adhesive
  • Adhesive Emulsion
  • Algae Solution
  • Bentonite
  • Chalk
  • Cocoa Mass
  • Condensed Milk
  • Dextrose
  • Fillers
  • Food Colours
  • Ice Cream Ingredients
  • Ink
  • Lacquer
  • Latex
  • Microcement
  • Milk
  • Oil Emulsion
  • Paint
  • Paraffin
  • Polyacrylamide
  • Polymer
  • Polymeric Slurry
  • Polystyrol
  • Polyvinyl Alcohol (PVA)
  • Printing Ink
  • Proprietary Gel
  • Resin
  • Viscous Resins
  • Water Based Paint
TOP
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.