With the correct pump selection and system design, the Wanner Hydra-Cell Pro® seal-less pump has the capability to pump viscous liquids (i.e., solvents, hot water, turpentine, glues, resins, and thick slurries) up to 20,000 cP.

The pumping action of the Hydra-Cell makes it a true positive displacement diaphragm pump at both high and low viscosities, and the flow rate is independent of discharge pressure, ensuring delivery of a predictable flow rate for a consistent process.

Pumps with dynamic seals can ‘leak’ low viscosity liquids past a contact area of rotating surface and static casing, resulting in a loss of flow. Flow rate loss increases as pressure rises and, through time with increasing wear at the rotating contact surface. At high pressure or high liquid temperature, risks increase sharply. Heating a liquid will typically reduce its viscosity, and as it thins it becomes more likely to leak past a seal or contact area.

Working at high pressure also exposes the pump to increased wear. In the Hydra-Cell seal-less diaphragm pump, this declining performance cycle associated with low viscosity liquids does not occur because there are no dynamic seals in the design. Unlike many competing technologies, the Hydra-Cell pump does not require lubricating process fluids to prevent internal component wear and is capable of running dry indefinitely, without damage.

When pumping high viscosity liquids, the spring-loaded disk design of the Hydra-Cell check valves overcomes the “floating” issues associated with vertical ball-and-seat valves. Many high viscosity materials are shear sensitive. Hydra-Cell's horizontal check valves have proven to have a low shear pumping action to preserve the structure of shear sensitive high viscosity liquids.

With no dynamic seals in its design, Hydra-Cell pumps have successfully replaced other pump technologies with dynamic seals, resulting in energy savings, lower maintenance and repair costs and sustaining system performance due to less down time.