PAINT & COATINGS

Transfer, metering, pre-disposal treatment of waste product and cleaning of tanks and mixing vessel

  • Even coating with virtually pulse-less linear flow to spray nozzles
  • Electric-driven solution saves energy

Ask for Assistance

Need help to reliably pump your process liquid?

Paint & Coatings

Hydra-Cell® pumps are used for applying coatings, but also during the manufacture of coating materials.

In coating processes, thickness control is important. The Hydra-Cell is a true positive displacement pump with a unique design in which multiple hydraulically balanced diaphragms flex in sequence to provide the pumping action. Flow is virtually pulse-less, with steady state accuracy better than +/- 1%, delivering a smoothly consistent supply of coating material to the spray nozzles. The pumping action is also low-shear. The complex chemistries of a coating material are not degraded by its passage through the pump. Paints often contain small flecks or micron suspended solids, no issue for the Hydra-Cell pump.

Another advantage over traditionally used AOD pumps is that the Hydra-Cell can work at higher pressures, allowing more flexibility.

Electrically driven (saving the cost of compressed air) Hydra-Cell pumps are exceptionally energy-efficient – giving energy cost savings of more than 60% as compared with an AOD pump delivering the same volume of material.

Hydra-Cell pump technology has proved equally valuable for the paints and coatings industry at the manufacturing stage – with a variety of transfer, metering and other process applications as well as pre-disposal treatment of waste product and cleaning of tanks and mixing vessels.

In each of these applications Hydra-Cell has often provided an alternative to an established pump, and outperformed it.

Applications

  • Spraying
  • Solvent cleaning

D/G03 with stainless steel pump head

D/G10 with stainless steel pump head

H/G25 with stainless steel pump head

We can help

Wanner’s technical engineers can assist you in selecting a Hydra-Cell Pro seal-less pump to reliably handle your most challenging process liquids.

  • Low NPSH due to High vapour pressure?
  • Need assistance or support with NPSH in terms of system design?
  • Are you replacing other pump technologies for abrasive/slurry duty application?
  • Our technical engineers can assist with selecting a Hydra-Cell seal-less pump to reliably handle your process liquid.
TOP
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.