English (International) 
Português 
简体中文 
D35 Series (US) / G35 Series (Metric)
| Maximum Flow Rate: | 36.5 gpm / 138 lpm |
| Maximum Pressure: | 1200 psig / 83 barg for Metallic Pump Heads |
Key Features
- The highest levels of volumetric and energy efficiencies across a full rpm range.
- API 674*
- ATEX available
- No mechanical dynamic seals, packing, or cups to leak, wear or replace – reduces maintenance, costs and downtime.
- Can run dry indefinitely; operates against a closed inlet without damage to the pump.
- Pumped liquid is 100% contained, eliminating emissions.
- Reliably handles a wide range of liquid viscosities, corrosives, abrasives, slurries and suspended solids that can destroy other pumps.
- Reduced ownership costs in acquisition, operation, service, maintenance, and energy use.
* Hydra-Cell Pro® pumps conform with API standards for accuracy, linearity and repeatability with certain exceptions. Contact Wanner for more information.
Resources
Specifications
D35 Series (Imperial NPT) / G35 Series (Metric BSPT)
| Model | Flow Capacities | max rpm | gpm | lpm |
|---|---|---|---|---|
| D35-X / G35-X | @ 1200 psig / 83 barg | 1050 | 36.5 | 138 |
| D35-E / G35-E | @ 1200 psig / 83 barg | 1150 | 34.0 | 129 |
| Maximum Discharge Pressure | |
| Metallic Heads: | 1200 psig / 83 barg @ 1150 rpm max. |
| Maximum Inlet Pressure | 500 psig / 34 barg |
| Maximum Operating Temperature | |
| Metallic Heads: | 250 ̊F / 121 ̊C - Consult Wanner for correct component selection for temperatures from 160 ̊F / 71 ̊C to 250 ̊F / 121 ̊C. |
| Maximum Solids Size | 800 microns |
More information available on the datasheet.
Materials
Liquid Head Materials
- Brass
- Cast Iron (Nickel-plated)
- Duplex Alloy 2205 Stainless Steel
- 316L Stainless Steel - Threaded or SAE Ports
- 316L Stainless Steel - ANSI RF Flanges 150 x 600 lb
- 316L Stainless Steel - ANSI RF Flanges 600 x 1500 lb
- 316L Stainless Steel - Tri-clamp Flanges
- Polypropylene
- Hastelloy CW12MW
Diaphragm Materials
- Aflas
- EPDM
- FKM
- PTFE
- FFKM
- Neoprene
- Buna-N
Valve Materials
- Ceramic
- Hastelloy C
- Nitronic 50
- Tungsten Carbide
- 17-4 Stainless Steel
Note: Materials selection may be configuration dependent and some materials may not be available in all regions / markets. Download applicable product datasheet for complete materials and component selection information.
Manuals
Accessories
Baseplate Assemblies
Note: baseplate dimensions are for representation only and may change based on region, configuration or motor selection. Contact Wanner for additional information on available baseplate assemblies and customization.
