Surface Power Fluid Pumps

25+ years service life. 90% energy efficiencies. Low servicing cost. 40 years pump design.

Wanner™ Hydra-Cell® Pro seal-less, surface power fluid pumps to API 674 and API 675 standards

Simple, low-cost servicing

  • No special tools required
  • No tight tolerances or packing to set and maintain
  • No dynamic seals

25+ years’ service life with minimal servicing costs

  • Oil change annually
  • Annual liquid end service kit
  • No separate crank or plunger oiling unit

High efficiencies at 90% for significant energy savings

Flow rate controllable to API675 performance standards to provide ultimate optimisation of Jet Pump production

Patented diaphragm position control protects the diaphragm under suction vacuum conditions, such as a blocked suction line

Can dry lift, prime and run dry indefinitely!

Minimum suction pressure of approximately -ve 0.2 barg

Maximum suction pressure of 34 barg

Watch video to see Hydra-Cell’s seal-less pump technology in action

Hydra-Cell’s seal-less, packing-free design significantly reduces service & maintenance costs

Surface power fluid pump

“Lowering the Cost of Lifting a Barrel of Fluid“

Contact us to request a copy of our digital brochure to see how you can optimise your oil and gas well production.

Chemical Treatment During Production

More Efficient and More Profitable Wells

There are many reasons for chemical treatment of the well completion; all can be treated by injection of the chemicals via the high pressure power fluid - whilst continuing production.

Hydra-Cell Pro seal-less, packing-free API 674 pump can be supplied as the chemical injection pump as part of jet pump skid package.

  • Corrosion control – Injection of corrosion inhibitors to slow corrosion attack.
  • Paraffin/Hydrate control – Can be alleviated by using heated power fluid to keep the paraffin dissolved in the crude.
  • Emulsions/Foams and froths – To break emulsions and speed separation of oil and water.
  • Scaling formation – In the wellbore, flow lines and facilities are caused by compounds such as calcium carbonate, calcium sulphate and barium sulphate. Chemicals injected to dissolve and break up scale.
  • Bacterial damage – Biocides injected to kill bacteria.
TOP
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.