English (American) 
Português 
简体中文 
MT08 LP ATEX Zone 1
| Minimum/Maximum Flow Rate: | 0.06 gph / 0.227 lph to 8.00 gph / 30.28 lph |
| Maximum Pressure: | 1500 psig / 103 barg for Metallic Pump Heads |
| 350 psig / 24 barg for Non-metallic Pump Heads |
Key Features
- The highest levels of volumetric and energy efficiencies across a wide, adjustable rpm range.
- API 674 pumps that also exceed API 675 standards for accuracy, linearity and repeatability.*
- For ATEX Zone 1 classified 2 GD IIC T4 applications requiring low flow rates at high pressures. With ultimate metering and dosing accuracy and controllability, exceeding API 675 performance standards, the MT8 features a triplex diaphragm design in one liquid end which creates virtually pulse-free, linear flow.
- Multiple diaphragms in a single, compact pump head deliver a virtually pulse-free flow.
- No mechanical dynamic seals, packing, or cups to leak, wear or replace – reduces maintenance, costs and downtime.
- Replenishes on every back stroke for superior accuracy at low- and high-suction pressures.
- Pumped liquid is 100% contained, eliminating emissions.
- Reliably handles a wide range of liquid viscosities, corrosives, abrasives, slurries and suspended solids that
can destroy other pumps. - Reduced ownership costs in acquisition, operation, service, maintenance, and energy use.
* Hydra-Cell Pro pumps conform with API standards for accuracy, linearity and repeatability with certain exceptions. Contact Wanner for more information.
Resources
Specifications
MT8 ATEX Zone 1 (Imperial NPT) / (Metric BSPT)
| Diaphragms per Liquid End | 3 |
| Flow Control | Electronic variable speed drive |
| Maximum Discharge Pressure | |
| Metallic Heads: | 1500 psig / 103 barg |
| Non-metallic Heads: | 350 psig / 24 barg |
| Maximum Inlet Pressure | |
| Metallic Heads: | 500 psig / 34 barg |
| Non-metallic Heads: | 300 psig / 20 barg |
| Operating Temperatures (min./max.) | |
| Metallic Heads: | 40°F / 4.4°C to 250°F / 121°C |
| Non-metallic Heads: | 40°F / 4.4°C to 140°F / 60°C |
| Consult Wanner for temperatures outside this range |
More information available on the datasheet.
Materials
Liquid Head Materials
- 316 SST - No leak detection
- Hastelloy C - No Leak Detection
- Alloy 20 - No Leak Detection
Diaphragm Materials
- PTFE - No leak detection
- (FDA-compliant wetted PTFE materials available on request - consult Wanner International)
Note: Materials selection may be configuration dependent and some materials may not be available in all regions / markets. Download applicable product datasheet for complete materials and component selection information.
Datasheets
| Datasheets | |
|---|---|
| MT08 ATEX Zone 1 Low Pressure (International/Metric) Datasheet (Performance, Dimensions, Options, Ordering Information) |  |
| Application Worksheet |
