D35 Series (US) / G35 Series (Metric)
Maximum Flow Rate: | 36.5 gpm / 138 lpm |
Maximum Pressure: | 1500 psig / 103 barg for Metallic Pump Heads |
Key Features
- The highest levels of volumetric and energy efficiencies across a full rpm range.
- API 674*
- ATEX available
- No mechanical dynamic seals, packing, or cups to leak, wear or replace – reduces maintenance, costs and downtime.
- Can run dry indefinitely; operates against a closed inlet without damage to the pump.
- Pumped liquid is 100% contained, eliminating emissions.
- Reliably handles a wide range of liquid viscosities, corrosives, abrasives, slurries and suspended solids that can destroy other pumps.
- Reduced ownership costs in acquisition, operation, service, maintenance, and energy use.
* Hydra-Cell Pro pumps conform with API standards for accuracy, linearity and repeatability with certain exceptions. Contact Wanner for more information.



Resources
Specifications
D35 Series (Imperial NPT) / G35 Series (Metric BSPT)
Model | Flow Capacities | max rpm | gpm | lpm |
---|---|---|---|---|
D35-X / G35-X | @ 1200 psig / 83 barg | 1050 | 36.5 | 138 |
D35-E / G35-E | @ 1200 psig / 83 barg | 1150 | 34.0 | 129 |
Maximum Discharge Pressure | |
Metallic Heads: | 1200 psig / 83 barg @ 1150 rpm max. |
1500 psig / 103 barg @ 700 rpm max. - Consult Wanner if operating above 1200 psig / 83 barg. | |
Maximum Inlet Pressure | 250 psig / 17 barg with 1500 psig / 103 barg maximum discharge pressure |
500 psig / 34 barg with 1200 psig / 83 barg maximum discharge pressure | |
Maximum Operating Temperature | |
Metallic Heads: | 250 ̊F / 121 ̊C - Consult Wanner for correct component selection for temperatures from 160 ̊F / 71 ̊C to 250 ̊F / 121 ̊C. |
Maximum Solids Size | 800 microns |
More information available on the datasheet.
Materials
Liquid Head Materials
- Brass
- Cast Iron (Nickel-plated)
- Duplex Alloy 2205 Stainless Steel
- 316L Stainless Steel - Threaded or SAE Ports
- 316L Stainless Steel - ANSI RF Flanges 150 x 600 lb
- 316L Stainless Steel - ANSI RF Flanges 600 x 1500 lb
- 316L Stainless Steel - Tri-clamp Flanges
- Polypropylene
- Hastelloy CW12MW
Diaphragm Materials
- Aflas
- EPDM
- FKM
- PTFE
- FFKM
- Neoprene
- Buna-N
Valve Materials
- Ceramic
- Hastelloy C
- Nitronic 50
- Tungsten Carbide
- 17-4 Stainless Steel
Note: Materials selection may be configuration dependent and some materials may not be available in all regions / markets. Download applicable product datasheet for complete materials and component selection information.
Datasheets
Datasheets | |
---|---|
D35 (US/Imperial) Datasheet (Performance, Dimensions, Options, Ordering Information) | ![]() |
G35 (International/Metric) Datasheet (Performance, Dimensions, Options, Ordering Information) | ![]() |
Application Worksheet | ![]() |
Installation Guidelines |
Manuals
Accessories
WP Data Tables
Accessories
WP Data Tables
Note: baseplate dimensions are for representation only and may change based on region, configuration or motor selection. Contact Wanner for additional information on available baseplate assemblies and customization.
3D CAD Files
Files | |
---|---|
D-35 w/Metallic Pump Head | (Solidworks Part) |
D-35 w/Metallic Pump Head | (IGES File) |
D-35 w/Metallic Pump Head | (STEP File) |
Files | |
---|---|
G-35 w/Metallic Pump Head | (Solidworks Part) |
G-35 w/Metallic Pump Head | (STEP File) |