English (American) 
Português 
简体中文 
D15 & D17 Series (US) / G15 & G17 Series (Metric)
| Maximum Flow Rate: | 15.5 gpm / 58.7 lpm |
| Maximum Pressure: | 2500 psig / 172 barg for Metallic Pump Heads |
Key Features
- The highest levels of volumetric and energy efficiencies across a full rpm range.
- API 674*
- ATEX available
- No mechanical dynamic seals, packing, or cups to leak, wear or replace – reduces maintenance, costs and downtime.
- Can run dry indefinitely; operates against a closed inlet without damage to the pump.
- Pumped liquid is 100% contained, eliminating emissions.
- Reliably handles a wide range of liquid viscosities, corrosives, abrasives, slurries and suspended solids that can destroy other pumps.
- Reduced ownership costs in acquisition, operation, service, maintenance, and energy use.
* Hydra-Cell Pro® pumps conform with API standards for accuracy, linearity and repeatability with certain exceptions. Contact Wanner for more information.
Resources
Specifications
D15 & D17 Series (Imperial NPT) / G15 & G17 Series (Metric BSPT)
| Model | Flow Capacities | max rpm | gpm | lpm |
|---|---|---|---|---|
| D15-X & D17-X / G12-X & G-17X | @500 psig / 34 barg | 1450 | 13.8 | 52.3 |
| D15-X & D17-X / G12-X & G-17X | @1500 psig / 103 barg | 1450 | 13.3 | 50.2 |
| D15-X & D17-X / G12-X & G-17X | @2000 psig / 138 barg | 1450 | 13.0 | 49.2 |
| D15-X & D17-X / G12-X & G-17X | @2500 psig / 172 barg | 1150 | 10.1 | 38.1 |
| D15-E & D17-E / G15-E & G17-E | @500 psig / 34 barg | 1750 | 15.5 | 58.7 |
| D15-E & D17-E / G15-E & G17-E | @1500 psig / 103 barg | 1750 | 14.8 | 56.2 |
| D15-E & D17-E / G15-E & G17-E | @2000 psig / 138 barg | 1450 | 12.0 | 45.5 |
| Maximum Discharge Pressure | |
| Metallic Heads: | 1500 psig / 103 barg @1750 rpm (D15-E & D17-E / G15-E & G17-E only) |
| 2000 psig / 138 barg @1450 rpm | |
| 2500 psig / 172 barg @1150 rpm (D15-X & D17-X / G15-X & G17-X only) | |
| Maximum Inlet Pressure | 500 psig / 34 barg |
| Maximum Operating Temperature | |
| Metallic Heads: | 250 ̊F / 121 ̊C - Consult Wanner for correct component selection for temperatures from 160 ̊F / 71 ̊C to 250 ̊F / 121 ̊C. |
| Maximum Solids Size | 500 microns |
More information available on the datasheet.
Materials
Liquid Head Materials
- Brass
- Duplex Alloy 2205 Stainless Steel
- 316L Stainless Steel
- Hastelloy C
Diaphragm Materials
- Aflas (PTFE O-ring)
- Buna-N-XS
- FKM
Valve Materials
- Nitronic 50
- Tungsten Carbide
- 17-4 Stainless Steel
Note: Materials selection may be configuration dependent and some materials may not be available in all regions / markets. Download applicable product datasheet for complete materials and component selection information.
Datasheets
| Datasheets | |
|---|---|
| D15/D17 (US/Imperial) Datasheet (Performance, Dimensions, Options, Ordering Information) |  |
| G15/G17 (International/Metric) Datasheet and ATEX Certification (Performance, Dimensions, Options, Ordering Information) | |
| Application Worksheet | |
| Installation Guidelines | |
Accessories
Accessories
Note: baseplate dimensions are for representation only and may change based on region, configuration or motor selection. Contact Wanner for additional information on available baseplate assemblies and customization.
3D CAD Files
| Files | |
|---|---|
| D-15 w/Metallic Pump Head | (Solidworks Part) |
| D-15 w/Metallic Pump Head | (IGES File) |
| D-15 w/Metallic Pump Head | (STEP File) |
| G-15 w/Metallic Pump Head | (Solidworks Part) |
| G-15 w/Metallic Pump Head | (STEP File) |
| D-17 w/Metallic Pump Head | (Solidworks Part) |
| D-17 w/Metallic Pump Head | (STEP File) |
| G-17 w/Metallic Pump Head | (Solidworks Part) |
| G-17 w/Metallic Pump Head | (STEP File) |
