English (American) 
Português 
简体中文 
D04 Series (US) / G04 Series (Metric)
| Maximum Flow Rate: | 2.9 gpm / 11.2 lpm |
| Maximum Pressure: | 2500 psig / 172 barg for Metallic Pump Heads |
Key Features
- The highest levels of volumetric and energy efficiencies across a full rpm range.
- No mechanical dynamic seals, packing, or cups to leak, wear or replace – reduces maintenance, costs and downtime.
- Can run dry indefinitely; operates against a closed inlet without damage to the pump.
- Pumped liquid is 100% contained, eliminating emissions.
- Reliably handles a wide range of liquid viscosities, corrosives, abrasives, slurries and suspended solids that can destroy other pumps.
- Reduced ownership costs in acquisition, operation, service, maintenance, and energy use.
Hydra-Cell Pro® pumps conform with global industry performance standards and certifications with certain exceptions. Contact Wanner for more information.
Resources
Specifications
D04 Series (Imperial NPT) / G04 Series (Metric BSPT)
D04 - Flow Capacities @2500 psi (172 bar)
| Model | Flow Capacities | max rpm | gpm | lpm |
|---|---|---|---|---|
| D04-X / G04-X | @2500 psig / 172 barg | 1750 | 2.95 | 11.16 |
| D04-E / G04-E | @2500 psig / 172 barg | 1750 | 2.04 | 7.71 |
D04 - Other Specifications
| Maximum Discharge Pressure | |
| Metallic Heads: | 2500 psig / 172 barg (D04-X & D04-E / G04-X & G04-E) |
| Maximum Inlet Pressure | 500 psig / 34 barg |
| Maximum Operating Temperature | |
| Metallic Heads: | 250 ̊F / 121 ̊C - Consult Wanner for correct component selection for temperatures from 160 ̊F / 71 ̊C to 200 ̊F / 93.3 ̊C. |
| Maximum Solids Size | 200 microns |
More information available on the datasheet.
Materials
Liquid Head Materials
- Brass
- 304 Stainless Steel
- 316L Stainless Steel
- 316L Stainless Steel - ANSI Flanges 600 x 2500 lb
- Hastelloy CW12MW
Diaphragm Materials
- Buna-N-XS
- EPDM
- FKM
- Neoprene
- PTFE
Valve Materials
- Nitronic 50
- Tungsten Carbide
- 17-4 PH Stainless Steel
- Hastelloy C
Note: Materials selection may be configuration dependent and some materials may not be available in all regions / markets. Download applicable product datasheet for complete materials and component selection information.
Accessories
Baseplate Assemblies
Note: baseplate dimensions are for representation only and may change based on region, configuration or motor selection. Contact Wanner for additional information on available baseplate assemblies and customization.
