English (American) 
Português 
简体中文 
T60 Series Low Pressure
| Maximum Flow Rate: | 93 gpm / 354 lpm / 3209 BPD |
| Maximum Pressure: | 1250 psig / 86 barg |
Key Features
- The highest levels of volumetric and energy efficiencies across a full rpm range.
- No mechanical dynamic seals, packing, or cups to leak, wear or replace – reduces maintenance, costs and downtime.
- Can run dry indefinitely; operates against a closed inlet without damage to the pump.
- Pumped liquid is 100% contained, eliminating VOCs, emissions and hazards.
- Reliably handles a wide range of liquid viscosities, corrosives, abrasives, slurries and suspended solids that can destroy other pumps.
- Reduced ownership costs in acquisition, operation, service, maintenance, and energy use.
Hydra-Cell Pro pumps conform with global industry performance standards and certifications with certain exceptions. Contact Wanner for more information.
Resources
Specifications
T60 Series (Imperial NPT) / (Metric BSPT)
| Model | Pressure psig / barg | max rpm | gpm | lpm | BPD |
|---|---|---|---|---|---|
| T60C | 1000 / 69 | 600 | 93 | 354 | 3209 |
| T60D | 1250 / 86 | 600 | 74 | 282 | 2554 |
| Maximum Discharge Pressure | |
| Metallic Heads: | |
| T60C | 1000 psig / 69 barg |
| T60D | 1250 psig / 86 barg |
| Maximum Inlet Pressure | 500 psig / 34 barg |
| Operating Temperature | |
| Maximum: | 180 ̊F / 82.2 ̊C |
| Minimum: | 40 ̊F / 4.4 ̊C |
| Consult Wanner for temperatures outside this range | |
| Maximum Solids Size | 800 microns |
| Input Shaft | Left or Right Side |
More information available on the datasheet.
Datasheets
| Datasheets | |
|---|---|
| T60 Low Pressure (US/Imperial) Datasheet (Performance, Dimensions, Options, Ordering Information) |  |
| T60 Low Pressure (International/Metric) Datasheet (Performance, Dimensions, Options, Ordering Information) | |
