English (American) 
Português 
简体中文 
P200 Pump Series
| Maximum Flow Rate: | 81.0 gph / 255.4 lph |
| Maximum Pressure: | 1000 psig / 69 barg for Metallic Pump Heads |
| 350 psig / 24 barg for Non-metallic Pump Heads |
Key Features
- The highest levels of volumetric and energy efficiencies across a wide, adjustable rpm range.
- API 674 pumps that also exceed API 675 standards for accuracy, linearity and repeatability.*
- ATEX Available
- Multiple diaphragms in a single, compact pump head deliver a virtually pulse-free flow.
- No mechanical dynamic seals, packing, or cups to leak, wear or replace – reduces maintenance, costs and downtime.
- Replenishes on every back stroke for superior accuracy at low- and high-suction pressures.
- Pumped liquid is 100% contained, eliminating emissions.
- Reliably handles a wide range of liquid viscosities, corrosives, abrasives, slurries and suspended solids that
can destroy other pumps. - Reduced ownership costs in acquisition, operation, service, maintenance, and energy use.
* Hydra-Cell Pro® pumps conform with API standards for accuracy, linearity and repeatability with certain exceptions. Contact Wanner for more information.
Resources
Specifications
P200 Series (Imperial NPT) / (Metric BSPT)
| Diaphragms per Liquid End | 3 |
| Flow Control | Electronic variable speed drive |
| Maximum Discharge Pressure | |
| Metallic Heads: | 1000 psig / 69 barg |
| Non-metallic Heads: | PVDF- 350 psig / 24 barg |
| Polypropylene- 250 psig / 17 barg | |
| Maximum Inlet Pressure | 250 psig / 17 barg |
| Maximum Operating Temperature | |
| Metallic Heads: | 250 ̊F / 121 ̊C. Consult Wanner for correct metallic head component selection for temperatures from 160 ̊F / 71 ̊C to 250 ̊F / 121 ̊C. |
| Non-metallic Heads: | 140 ̊F / 60 ̊C |
| Maximum Solids Size | 200 microns |
More information available on the datasheet.
Materials
Liquid Head / Retainer Materials
- Brass / Hastelloy C
- Polypropylene / Polypropylene
- PVDF / PVDF
- 316L Stainless Steel / Hastelloy C
- Hastelloy C / Hastelloy C
- Regional difference, this is Wanner International only
Diaphragm & O-ring Materials (Oil)
- Aflas / PTFE o-ring (Synthetic oil)
- Aflas / PTFE o-ring & FKM drive case elastomers (Mesamoll oil)
- EPDM (EPDM-compatible oil)
- FKM (Standard oil)
- FKM (Food-contact oil)
- FKM (Synthetic oil)
- PTFE (Food-contact oil)
- PTFE (EPDM oil)
- PTFE (Synthetic oil) Note: PTFE diaphragms require flooded suction.
- Neoprene (Standard oil)
- Neoprene (Food-contact oil)
- Neoprene (Synthetic oil)
- Buna-N (Standard oil)
- Buna-N (Food-contact oil)
- Buna-N (Synthetic oil)
Check Valve Materials (Valve Spring / Valve Seat / Valve)
- Elgiloy / 316L SST / Nitronic 50
- Hastelloy C / Hastelloy C / Hastelloy C
- Elgiloy / Ceramic / Ceramic
- Hastelloy C / Ceramic / Ceramic
Note: Materials selection may be configuration dependent and some materials may not be available in all regions / markets. Download applicable product datasheet for complete materials and component selection information.
Datasheets
| Datasheets | |
|---|---|
| P200 Metering Pump (US/Imperial) Datasheet (Performance, Dimensions, Options, Ordering Information) |  |
| P200 Metering Pump (International/Metric) Datasheet and ATEX Certification (Performance, Dimensions, Options, Ordering Information) | |
Manuals
Accessories
| Files | |
|---|---|
| HCMS Accessories Catalog | |
3D CAD Files
