Home > Applications by Industry Overview > Industrial Cleaning

INDUSTRIAL CLEANING

High pressure cleaning capability, high and sustainable pumping efficiency

  • Long life, low maintenance pumps
  • Reliably handles caustic cleaning fluids - including reclaimed and recirculated liquids

Ask for Assistance

Need help to reliably pump your process liquid?

Industrial Cleaning

Hydra-Cell® ’s high pressure cleaning capability, high and sustainable pumping efficiency, seal-less pump design and ability to handle virtually any industrial cleaning liquid, hot or cold, the Hydra-Cell pump is ideally suited to industrial cleaning and washing pumping applications.

Water is becoming an expensive resource. Those using it for industrial cleaning are looking to optimise their cleaning processes. Options of the Hydra-Cell industrial cleaning pump include:

  1. Increasing liquid pressures from 5–6 bar (73–87 psi) to much higher levels.
  2. Using recycled water, which may contain fine suspended solids.
  3. Using chemicals sprayed at high pressure to achieve cleaning, then recycled to maximise use.
  4. Using hot liquids >800 C to improve cleaning efficiency

The pumping pressures required for industrial cleaning and the liquids in use can make severe demands on the pump. Piston pumps and most other types that can operate at high pressure rely on mechanical seals to separate drive mechanism from the pumped fluid. With these liquids and pressures, the seal-reliant pump is fundamentally susceptible to premature wear in an industrial setting – resulting in expensive repairs, reduced efficiency and wasted energy. This is not the case with a Hydra-Cell.

No dynamic seals means that leakage of cleaning liquid is eliminated contributing better environmental control and health and safety.

Hydra-Cell industrial cleaning pumps have established a reputation for long life, low maintenance cost and universal compatibility when handling cleaning fluids - including reclaimed and recycled liquids.

Man cleaning and washing pump

Applications

  • Tanker cleaning
  • CIP systems
  • Lance systems
  • Solvent & chemical cleaning
  • High pressure parts cleaning
H25 Brass

H/G25 with brass pump head

D/G35 with stainless steel pump head

T60

T60 with brass pump head

We can help

Wanner’s technical engineers can assist you in selecting a Hydra-Cell Pro seal-less pump to reliably handle your most challenging process liquids.

  • Low NPSH due to High vapour pressure?
  • Need assistance or support with NPSH in terms of system design?
  • Are you replacing other pump technologies for abrasive/slurry duty application?
  • Our technical engineers can assist with selecting a Hydra-Cell seal-less pump to reliably handle your process liquid.
TOP
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.