English (American) 
Português 
简体中文 
Home > Pharma-PRO > PH80 Series
PH80 Series Seal-less Pump
| Max. Flow Rate: | 246 l/min (65 US gpm) |
| Max. Pressure: | 40 bar (580 psi) for Metallic Pump Heads |
Key Features
- Low pulse flow; no pulsation dampeners needed in most applications
- Unique multiple diaphragm arrangement results in compact design, saving on installation space
- Extremely accurate wide adjustable flow range for ultimate controllability
- Low shear pumping action
- Reliably handles challenging liquids and slurries including abrasives, corrosives, non-lubricating, and liquids with micron-sized particles
- ASME BPE flange connections as standard
- Wetted surfaces polished to ≤ 0.8 Ra
- Diaphragm options to FDA compliance
- ATEX certification
- TSE / BSE-free materials
- Multipurpose: CIP and main process pump
- Full material traceability
Resources
Pharma-Pro PH80 | Specifications
PH80A - Bare Shaft Pump Model
| Model | Flow Capacities | rpm | I/min | US gpm |
|---|---|---|---|---|
| PH80AX | @40 bar (580 psi) 6-pole motor @50 Hz | 960 | 236.2 | 62.4 |
| PH80AX | @40 bar (580 psi) 8-pole motor @50 Hz | 730 | 179.6 | 47.45 |
| Model | Delivery @ 40 bar (580psi) | litres/rev | US gal/rev |
|---|---|---|---|
| PH80AX | @40 bar (580 psi) | 0.246 | 0.0650 |
| Diaphragms per Liquid End | 5 | |
| Maximum Discharge Pressure | ||
| Metallic Heads: | 40 bar | 580 psi |
| Maximum Inlet Pressure | 17 bar | 250 psi |
| Maximum Operating Temperature | ||
| Metallic Heads: | 90°C | 194°F |
| Consult Wanner for correct component selection for temperatures greater than 71°C (160°F) | ||
| Maximum Solids Size | 800 microns |
Materials
Liquid Head Materials
- 316L Stainless Steel
Diaphragm / O-rings / Follower Materials
- EPDM / PTFE / Hastelloy C276
Check Valve Materials
- Hastelloy C
Datasheets
| Datasheets | |
|---|---|
| PH80 (International/Metric) Datasheet and ATEX Certification (Performance, Dimensions, Options, Ordering Information) |  |
