公司产品
HYDRA-CELL G-35
G35 Series (Metric)
G35 - Flow Capacities @ 83 Bar (1200 Psi) 6-Pole Motor @ 50 Hz | ||||||
Model | rpm | gpm | l/min | |||
G35-E | 960 | 29.00 | 110.00 | |||
G35-X | 960 | 33.50 | 127.00 | |||
G35 - Flow Capacities @ 83 Bar (1200 Psi) 8-Pole Motor @ 50 Hz | ||||||
Model | rpm | gpm | l/min | |||
G35-E | 730 | 22.10 | 83.60 | |||
G35-X | 730 | 25.50 | 96.60 | |||
G35 - Delivery @ 83 Bar (1200 Psi) | ||||||
Model | gal/rev | liters/rev | ||||
G35-E | 0.0296 | 0.1120 | ||||
G35-X | 0.0347 | 0.1314 | ||||
G35 - Delivery @ 103 Bar 1500 Psi) | ||||||
Model | gal/rev | liters/rev | ||||
G35-X | 0.0330 | 0.1250 | ||||
G35 - Other Specifications | ||||||
Maximum Discharge Pressure | ||||||
Metallic Heads: | 103 bar (1500 psi) @ 700 rpm | |||||
Maximum Inlet Pressure | 17 bar (250 psi) with 103 bar (1500 psi) | |||||
maximum discharge pressure | ||||||
34 bar (500 psi) with 83 bar (1200 psi) | ||||||
maximum discharge pressure | ||||||
Maximum Operating Temperature | ||||||
Metallic Heads: | 121 ̊C (250 ̊F) - Consult factory for correct component selection for temperatures from 71 ̊C (160 ̊F) to 121 ̊C (250 ̊F). | |||||
Non-metallic Heads: | 140 ̊F (60 ̊C) | |||||
Maximum Solids Size | 500 microns | |||||
Inlet Port | 1-1/4 inch BSPT | |||||
1-1/4 inch NPT | ||||||
Discharge Port | 3/4 inch BSPT | |||||
3/4 inch NPT | ||||||
Shaft Diameter | 28.6 mm (1-1/8 inch) | |||||
Shaft Rotation | Reverse (bi-directional) | |||||
Bearings | Tapered roller bearings | |||||
Oil Capacity | 2.1 liters (2.2 US quarts) | |||||
Weight | ||||||
Metallic Heads: | 66 kg (145 lbs.) | |||||