产品选型 >全系选型图

P600

P600 - Specifications





Diaphragms per Liquid End

3


Flow Control

Electronic variable speed drive


Maximum Discharge Pressure



Metallic Heads:

1000 psi (69 bar)


Non-metallic Heads:

PVDF- 350 psi (24 bar)



Polypropylene- 250 psi (17 bar)


Maximum Inlet Pressure

250 psi (17 bar)


Maximum Operating Temperature



Metallic Heads:

250 ̊F (121 ̊C)*


Non-metallic Heads:

140 ̊F (60 ̊C)


Inlet Port

1-1/2 inch NPT or BSPT


Discharge Port

1 inch NPT or BSPT


Weight (less motor)**



Metallic Heads:

146.0 lbs (66.2 kg)


Non-metallic Heads:

111.0 lbs (50.3 kg)


Dimensions (less motor)**



Metallic Heads:

10.74” W x 20.64” D x 11.57” H



(272.7 mm W x 524.3 mm D x   293.9 mm H)


Non-metallic Heads:

10.74” W x 21.56” D x 11.57 H”



(272.7 mm W x 547.6 mm D x   293.9 mm H)




* Consult factory for correct   component selection for temperatures from 160 ̊F (71 ̊C) to 250 ̊F (121 ̊C).


** For 56C motor frame only.   Consult factory for other motor frame sizes.